60# Matte Litho FSC® is a 60# paper which features a dull, matte-coated print surface. Good printing with water-based flexo, UV flexo, UV Inkjet (UVIJ), screen, and solvent ink systems. Not recommended for offset printing. This facestock can be imprinted.

The FSC® Certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® Chain of Custody Certification verifies that FSC® Certified material is identified or kept segregated from non-certified or non-controlled material through this chain.

	Basis Weight:	62.5# per ream ± 10%
	Caliper:	0.00346 inches ± 10%
	Tensile:	MD 28.12# per inch width CD 12.92# per inch width
	Tear:	MD 47.70 grams per sheet CD 50.95 grams per sheet
	Stiffness:

Adhesive:
R128 is a general purpose removable rubber-based adhesive with high initial tack, internal strength, and stable adhesion. R128 adhesive is recommended where clean removability is of primary importance. Can be used on a variety of substrates including glass, metal, plastic, and others. R128 adhesive is suitable for applications where compliance with FDA 175.105 is required. This sections covers applications where incidental contact between food and adhesive could occur.

	Type:	Hot Melt Rubber
	Minimum Application Temperature:	+10° F
	Service Temperature Range:	-65° F to +120° F

Typical Performance Data: , 60# C1S Paper at room temperature on standard lab panels

	Stainless Steel Loop Tack: Peel Adhesion:	1.7 lbs 0.4-0.7 lbs
	Treated LDPE Loop Tack: Peel Adhesion:	1.3 lbs 0.3-0.6 lbs
	Glass Loop Tack: Peel Adhesion:	1.3 lbs 0.4-0.7 lbs

Liner:
40# SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness and tear resistance. Used primarily for roll-to-roll label applications

	Basis Weight:	41# per ream ±10% (500 sheets 25" X 36")
	Caliper:	0.0024 inches ±10%
	Tensile:	MD 42# per inch width CD 16# per inch width
	font>	MD 39 grams CD 54 grams

Adhesive:
S246 is a general purpose permanent rubber based adhesive featuring high initial tack and ultimate adhesion. S246 is suitable for applications requiring FDA compliance with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2), has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Hot melt rubber
	Minimum Application Temperature:	+40° F
	Service Temperature Range:	-65° F to +160° F

Typical Performance Data: , 60# C1S paper at room temperature on standard lab panels

	Stainless Steel Loop Tack: Peel Adhesion:	6.2 lbs 3.0 lbs-tear
	HDPE Loop Tack: Peel Adhesion:	4.3 lbs 2.2 lbs-tear
	Polypropylene Loop Tack: Peel Adhesion:	4.5 lbs 3.0 lbs-tear
	Glass Loop Tack: Peel Adhesion:	6.0 lbs 2.6 lbs-tear

Liner:
50#SCK is a bleached supercalendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.

	Basis Weight:	55# per ream ±10% (500 sheets 25" x 36")
	Caliper:	0.0032 inches ±10%
	Tensile:	MD 39# per inch width CD 20# per inch width
	Tear:	MD 48 grams per sheet CD 58 grams per sheet

Total Construction Caliper (approximate): 0.0108 inches ± 10%