71800

Data Sheet

Description:PRIMAX 350/S1000/44#PK

PRIMAX® 350 is a corona-treated, flexible, white opaque polyolefin film with exceptional dimensional stability for use in a wide range of applications, including prime label. Printable by web screen, UV letterpress, flexo solvent, and water-based inks. Use of in-line corona treatment will greatly expand the number of inks which can be used. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection. This product can be diecut and stripped at high speeds on standard web-fed presses using typical film tooling. Excellent dispensability with direct comparison to white Opticite* and better performance over clear MDPE and clear flex vinyl. NOTE: Opticite* is a trademark of The Dow Chemical Company. S1000 is a clear permanent adhesive specifically designed to exhibit excellent wet-out characteristics on clear films. Frequently used in the prime label market where squeezability and clear labeling are critical. Meets the requirements of FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

Attributes

Service: A016756,A336938,A336937,A334180

Product Type: Pressure Sensitive

Faces: FILM

Facestock: PRIMAX 350

Finish: Matte

Print Method: Letterpress, Screen Print, Flexo - UV, Flexo -Water Based

Service Program: Stock,Stock,Exact,Exact,Full Master Roll

Adhesive Functionality: Permanent

Adhesive Name: S1000

Minimum Application Temperature: 10 °F / -12 °C

Service Temperature Range High: 200 °F / 93 °C

Service Temperature Range Low: -40 °F / -40 °C

Substrate: Plastic - LDPE,Glass,Metal,Corrugated,Plastic - PET,Plastic - HDPE

Liner: 44#PK

Construction Thickness (+/- 10%): 7.28224

Weight per MSI: .2546 lbs

Splice Free: No

Compliance: ROHS-Complies,Conflict Minerals-Does Not Contain

Color: WHITE